|
|
|
Press Releases
April 30, 2008
The German Partnership for Dummy Technology and Biomechanics (PDB) has extended the partnership with First Technology Safety Systems (FTSS) to support continual quality enhancement of the FTSS frontal dummy models.
March 20, 2008
FTSA Technology Forum: Advances in Virtual and Physical Crash Test Dummies to be held in Aschaffenburg, Germany
January 22, 2008
First Technology Safety Systems, Inc. Establishes Load Cell Manufacturing Presence in China
November 6, 2007
Change of Representative Office for Korean Market
September 17, 2007
The PDB version of Hybrid III 50th percentile dummy FE model available to all customers starting October 1, 2007, three months earlier than planned
September 12, 2007
Final Rule Announced for Incorporation of a Dynamic Pole Test and Enhancement of Movable Deformable Barrier Testing
August 27, 2007
Christopher J. O'Connor Appointed President and Chief Executive Officer of First Technology Safety and Analysis
August 24, 2007
Bachar Aljundi Appointed Engineering Director First Technology Safety Systems
December 18, 2006
Final Rule Announced for SID-IIs Build Level D and ES-2re Dummies
November 27, 2006
FTSS Appoints New Vice President of Global Sales and Marketing
August 1, 2006
Siva Thiruvasagan Appointed Manager Technical Marketing and Sales India for First Technology Safety Systems
January 9, 2006
Another First! - Official release of Small Female WorldSID Prototype Dummy
November 10, 2005
First Technology Safety Systems Expands Its Engineering Base
February 17, 2005
First Technology, PLC mourns loss of Samuel Alderson
March 24, 2004
New Representation Agreement between FTSS and Microsys
March 23, 2004
Acquisition of Thames Side-Maywood Limited
March 9, 2004
ABAQUS Signs Agreement with FTSS for Development of Digital Models of Automotive Crash Test Dummies
November 27, 2003
The 100th ES-2 Dummy Has Shipped
August 7, 2003
Another First - FTSS Receives A2LA Accreditation
The American Association for Laboratory Accreditation (A2LA) has certified the FTSS Plymouth ATD & Instrumentation Calibration Laboratories to the prestigious A2LA accreditation.
March 5, 2003
FTSS Engineers Honored with Ralph H. Isbrandt Automotive Safety Engineering Award
May 1, 2002
Further Information Regarding NHTSA's Proposed Changes to FMVSS 213 (488k PDF)
September 8, 2001
First Technology Safety Systems and Diversified Technical Systems Introduce TDAS G5.
In-Dummy DAS has been around for over 10 years in various forms but the products offered have failed to be a complete solution. The new technology of the TDAS G5 and a unique partnership between DTS and FTSS have brought In-Dummy DAS to the forefront again.
February 6, 2001
First Technology Safety Systems acquires HITEC Corporation
HITEC Corporation is acquired by First Technology PLC, and reports to the Safety Systems Division. HITEC is a specialist provider of strain gauge application services to automotive, aerospace and power generation industries. Click on above link for the full press release.
October 6, 2000
First Technology Safety Systems and Diversified Technical Systems Inc.
First Technology announces that it has entered into an agreement with Diversified Technical Systems, Inc. (DTS), to provide worldwide distribution for the DTS TDAS PRO crashworthy data acquisition product line in Europe, Africa, the Middle East, Asia, Mexico, Central and South America.
May 5, 2000
New Airbag Regulation Requires New Family of Dummies
A new Federal Airbag regulation will require automakers to run crash tests using a whole new family of dummies manufactured by First Technology of Plymouth, Michigan.
March 6, 2000
First Technology Safety Systems & the Alliance of Automobile Manufacturers
announce the introduction of two advanced anthropomorphic test dummies.
March 6, 2000
Lear Corporation & First Technology
announce new advanced test dummy applications.
September 9, 1999
First Technology PLC ("First Technology")
Announces the acquisition of TNO Crash Dummies, BV and Ogle TNO Safety Products, Ltd.
|
|
|
